Hot Sale 4G Router

Created on Today

4G/WiFi/RJ45

1. Overview

4G router Industrial-grade 4G router is a high-performance communication product developed by ZLAN for 4G network requirements.(The 4G router is a model that uses the European 4G module) It combines several technologies such as routing, switching, 4G, WLAN and encryption to meet the diverse needs of industry users in data transmission. This device can implement a variety of functions such as WAN to LAN/WiFi, WiFi to LAN/WiFi and 4G to LAN/WiFi, providing users with a flexible network connection. The 4G router also supports WEB configuration, making network management more convenient and efficient.

In terms of hardware, the 4G router is equipped with a high-performance 32-bit processor that can quickly process various network protocols and large amounts of data. In addition, it is equipped with multiple interfaces, including four 10/100M LAN ports, one WAN port, WiFi interface and 4G interface, making it easy to interconnect with various terminal devices.

The 4G router also supports 4G/ wired smart backup and can switch to a normal network by itself. Improve network availability.

Figure 1 4G router

4G routers are widely used in the industrial field. In modern factories, it enables stable data transmission between equipment and control centers, ensuring continuous operation of production lines. In areas with harsh environments, such as mines and ports, 4G routers can overcome challenges such as complex terrain and harsh environments to provide reliable and real-time communication services. In addition, 4G routers are also widely used in remote monitoring systems in logistics, transportation and other industries to help achieve intelligent management and scheduling. Its flexible networking capability and wide coverage make all aspects of industrial production can be effectively supported and guaranteed.

4G router can be applied to:

Create an internal subnet when IP address resources are scarce.

The network port PLC is converted into WiFi access to the existing network to achieve seamless connection;

With its WiFi relay/bridge function, the WiFi communication range can be further expanded;

When the WAN port is disconnected, the 4G router can quickly switch to the 4G network

1.1 Product Appearance

Figure 3 Appearance of 4G router

1.2 Product Interfaces

1. This device has four LAN ports distributed on the left and right sides, two on each side. There is a WAN port next to the power supply of the device. When using the network cable, you only need to insert the network cable into the corresponding network port as required.

2. The antenna interface of the device adopts the standard 50Ω/SMA (female head) to ensure compatibility with the antenna of the corresponding working band. Generally speaking, only the antenna on the left side needs to be installed, and you can choose a glue stick antenna or a suction cup antenna. For 4G antennas, it is located on the front panel of the device and usually uses a suction cup antenna.

3. Next to the panel light, there is a hidden SIM card slot. The 4G router uses the 4G network of all Netcom. SIM card of any operator is required. Please ensure that the device is powered off when installing SIM card. Thanks to the embedded SIM card holder design, SIM card installation is very convenient. Simply push the SIM card chip down into the card slot until it locks. If you need to pull out the SIM card, push it a little harder and it will automatically eject.

1.3 Panel Indicators

The panel light of 4G router is shown as follows:

POWER	SYS	4G
WiFi	LAN2	LAN4
WAN/LAN1	LAN3	LAN5

Figure 4 Panel light

The meanings of specific indicators are shown in the following table:

Name	colour	Instructions
WAN/LAN1	green	WAN port indicator. On: The WAN port is connected
WiFi	green	WiFi indicator. On or blinking: The WiFi is working properly
POWER	RED	Power indicator: When the device is powered on
LAN	green	Four LAN port indicators correspond to four LAN ports. If on, the corresponding LAN ports are connected
SYS lamp	green	4G power on indicator. On: The 4G module is powered on
4G lamp	blue	If the indicator is steady on, the dial is being dialed. If the indicator is blinking, the dial is successful
Reset button	Button	After the device is started: press 1 second to release, the device will restart after 5 seconds; Press for 5 seconds to release, the device restarts after 5 seconds, and the device is reset to factory Settings

Table 1 Indicator parameters

2. Technical parameters

Main product parameters
Parameter name	Parameter	remark
Support mode 4G router	4G CAT1 supports 3 modes:B1/B3/B5/B8@FDD LTE B34/B38/B39/B40/B41@TDD-LTE B3/B8@GSM It includes Unicom 4G, 2G, mobile 4G, 2G and telecom 4G networks.	Most of Asia and Africa
Support mode 4G router-E (European frequency band)	4G CAT1 supports EGSM900 DCS1800 LTE-FDD B1 LTE-FDD B3 LTE-FDD B5 LTE-FDD B7 LTE-FDD B8 LTE-FDD B20	European version
Transmission rate	LTE：Max 10Mbps（down）/Max 5 Mbps（up） GPRS：85.6Kbps（down）/Max85.6Kbps（up）
SIM card	Voltage: 3V, 1.8V; Size: Medium card
Antenna interface	50Ω/SMA glue stick antenna or suction cup antenna is optional
Power interface	Power terminal input.
Input voltage	DC9V~24V
port	LAN port 4, WAN port 1, SIM1, 4G antenna 1,WiFi antenna *1
Basic function	Network port to network port /WiFi, WiFi to network port /WiFi, 4G to network port /WiFi
Advanced function	Firewall, Static routing, Log services, channel analysis, DHCP/DNS, Network diagnostics, host name Mapping
Product size	37.6(L)x 83.6(W)x 89.2(H)mm
Configuration mode	WEB Page configuration (default: 192.168.8.1)
Operating temperature	-40 degrees to 85 degrees
Storage temperature	-40 degrees to 120 degrees
Humidity range	0 to 95% non-condensing